simpleType EnRouteDelayTypeType
namespace http://www.fixm.aero/flight/4.2
type restriction of xs:string
properties
base xs:string
used by
element EnRouteDelayType/delayType
facets
Kind Value Annotation
enumeration OPERATOR_REQUEST_POINT
documentation
The delay is an Operator (Airspace User) request to 'spend time' at the point, thus the delay has to be added to the flight duration to the next point to compute the estimate to the next point.
enumeration OPERATOR_REQUEST_SEGMENT
documentation
The delay is an Operator (Airspace User) request to 'spend time' at the segment starting at point, thus the delay has to be understood as the total duration between the point and the next one.
enumeration OPERATOR_REQUEST_AIRSPACE
documentation
The delay is an Operator (Airspace User) request to 'spend time' in an airspace after the RoutePoint the name of which is in delayReference, the delayValue is the time in that airspace, the entry and exit time into that airspace is in the BEGIN_STAY and END_STAY info of the trajectory.
enumeration OPERATOR_REQUEST_AERODROME
documentation
The delay is an Operator (Airspace User) request to 'spend time' at an aerodrome after the RoutePoint, the name of the aerodrome is in the delayReference field, the points at which the Operator leaves its route and rejoin it go to the aerodrome are in the BEGIN_STAY and END_STAY info of the trajectory
enumeration OPERATOR_REQUEST_HOLDING
documentation
The delay is an Operator (Airspace User) request to 'spend time' at a holding pattern the anchor point of which is the RoutePoint.  The holding pattern name if any is in delayReference.  delayValue used to compute estimates as in OPERATOR_REQUEST_POINT
enumeration ATFM
documentation
The delay is an ASP request for airborne holding. The holding pattern name is in the delayReference field. The delay value used to compute estimates as in OPERATOR_REQUEST_POINT.
annotation
documentation
Indicates if the en route delay is planned airborne holding, or Operator (Airspace User) requested operations at a specified location.
source <xs:simpleType name="EnRouteDelayTypeType">
 
<xs:annotation>
   
<xs:documentation>Indicates if the en route delay is planned airborne holding, or Operator (Airspace User) requested operations at a specified location.</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:string">
   
<xs:enumeration value="OPERATOR_REQUEST_POINT">
     
<xs:annotation>
       
<xs:documentation>The delay is an Operator (Airspace User) request to 'spend time' at the point, thus the delay has to be added to the flight duration to the next point to compute the estimate to the next point.</xs:documentation>
     
</xs:annotation>
   
</xs:enumeration>
   
<xs:enumeration value="OPERATOR_REQUEST_SEGMENT">
     
<xs:annotation>
       
<xs:documentation>The delay is an Operator (Airspace User) request to 'spend time' at the segment starting at point, thus the delay has to be understood as the total duration between the point and the next one.</xs:documentation>
     
</xs:annotation>
   
</xs:enumeration>
   
<xs:enumeration value="OPERATOR_REQUEST_AIRSPACE">
     
<xs:annotation>
       
<xs:documentation>The delay is an Operator (Airspace User) request to 'spend time' in an airspace after the RoutePoint the name of which is in delayReference, the delayValue is the time in that airspace, the entry and exit time into that airspace is in the BEGIN_STAY and END_STAY info of the trajectory.</xs:documentation>
     
</xs:annotation>
   
</xs:enumeration>
   
<xs:enumeration value="OPERATOR_REQUEST_AERODROME">
     
<xs:annotation>
       
<xs:documentation>The delay is an Operator (Airspace User) request to 'spend time' at an aerodrome after the RoutePoint, the name of the aerodrome is in the delayReference field, the points at which the Operator leaves its route and rejoin it go to the aerodrome are in the BEGIN_STAY and END_STAY info of the trajectory</xs:documentation>
     
</xs:annotation>
   
</xs:enumeration>
   
<xs:enumeration value="OPERATOR_REQUEST_HOLDING">
     
<xs:annotation>
       
<xs:documentation>The delay is an Operator (Airspace User) request to 'spend time' at a holding pattern the anchor point of which is the RoutePoint.  The holding pattern name if any is in delayReference.  delayValue used to compute estimates as in OPERATOR_REQUEST_POINT</xs:documentation>
     
</xs:annotation>
   
</xs:enumeration>
   
<xs:enumeration value="ATFM">
     
<xs:annotation>
       
<xs:documentation>The delay is an ASP request for airborne holding. The holding pattern name is in the delayReference field. The delay value used to compute estimates as in OPERATOR_REQUEST_POINT.</xs:documentation>
     
</xs:annotation>
   
</xs:enumeration>
 
</xs:restriction>
</xs:simpleType>


XML Schema documentation generated by XMLSpy Schema Editor http://www.altova.com/xmlspy